Our professional products get the job done! While providing good coverage and ease of application, these products are washable in the appropriate finish. Excellent for areas where they are not exposed to harsh conditions, our Professional products cover well and apply easily. A value alternative for areas which get less wear and tear.
*After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time.
*After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time. **Based on Benjamin Moore lab test results. Label and technical data sheet recommendations must be followed including priming recommendations over masonry where applicable.
*After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time.
Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13.
Recommended for: For application to new or previously painted interior/exterior surfaces including: tilt-up concrete construction, stucco surfaces, block construction.
A full bodied and high build, latex block filler specially formulated for easy brush, roll or spray application. It may be top-coated with conventional Latex or Alkyd finishes as well as with Epoxy, Aliphatic Urethane, and Quick Dry Enamels.
Fills small cracks and voids in concrete, cinder block, and rough masonry
Can be used with either interior or exterior Benjamin Moore finish coatings
Can be used on exterior masonry surfaces when properly top coated with a Benjamin Moore exterior finish product.